Server PSU Based Radio Power Supply: Difference between revisions

From SUWS-wiki
No edit summary
Line 1: Line 1:
{{Project
{{Project
|Title=Server PSU Based Radio Power Supply
|Title=Server PSU Based Radio Power Supply
|Status=In Progress
|Status=Completed
|Project Lead=User:Stealthbird97
|Project Lead=User:Stealthbird97
|Description=A low cost, high current power supply for Amateur Radio utilising a Server PSU.
|Description=A low cost, high current power supply for Amateur Radio utilising a Server PSU.

Revision as of 18:07, 8 June 2017

Server PSU Based Radio Power Supply
Server PSU Based Radio Power Supply
Status Completed
Project Lead User:Stealthbird97

Server PSU Based Radio Power Supply

A low cost, high current power supply for Amateur Radio utilising a Server PSU.


Designs are available at Github

Feature Ideas

  • Near 13.8VDC Output, 47 A (Exact specs to be determined)
  • Various Fan Control Options.
  • Distribution (2 Fused Anderson Powerpole connectors)

Tasks (To Do)

  • Look into reducing EMI

Tasks (Completed)

  • Identify maximum voltage obtainable from supply.
    • OVP cuts in at about 13.9v, however OVP protection will trip if a 1A load is suddenly attached by 13.75v.
  • Modify PSU to boost voltage 12v->13.8v (or as close as possible)
    • This is possible using a resistor between the 12v sense-return pin and ground. 260Ohm resistor suggested.
  • PCB designed (See Github)

Parts List

  • 1x HP DPS-600PB Server Powersupply
  • 1x HP DPS-600 Distribution Board PCB by M0YCH
  • 1x Amphenol FCI 51760-10201202AALF Connector
  • 1x Vishay / Sfernice 1k Trimmer T93YA102KT20 (Fan Control) (R4)
  • 1x Vishay / Sfernice 5k Trimmer T93YA502KT20 (Voltage Control) (R3)
  • 1x LM34 (Fan Control) (IC1) (Optional)
  • 4x Keystone 3522 Fuse Holder
  • 2x 330ohm though hole 0.25w
  • 2x 3mm LED
  • 2x 0.1u Capacitor
  • 2x black 45A Powerpole Housing
  • 2x Red 45A Powerpole Housing
  • 4x 45A Powerpole PCB Contacts

Complications

  • Original PSU was going to be a Dell POWEREDGE 2950 Redundant Power Supply however upon testing this supply, voltage would not rise above 12.2v and would drop to unusable voltages under load.

Notes/Resources