SUSU Antenna Array

From SUWS-wiki
Revision as of 15:55, 3 August 2015 by TylerWard (talk | contribs) (→‎Kit)

This page describe the plan to build a new antenna array to mount back on the mast on the West Building (outside the Stag's Head). This would be of benefit to SUWS as well as other societies listed below.

Facebook Group

MastRendering.jpg


Current Status

  • Currently in purchasing and refurbishment stage as well as final planning on assembly and connections

Task List

The task list can be found at https://github.com/SUWS/mast-planning/issues

Interested Parties

  • SUWS (us) - General Amateur Radio operation / tracking high altitude balloons.
  • Space Flight Society
    • Interested in helping us.
    • Interested in tracking satellite / high altitude balloons
  • SUSUtv
    • Interested in directional Wi-Fi for live campus broadcast
  • Surge
    • Interested in properly fixing their FM antenna
  • Astronomy
    • Interested in 1GHz-2GHz (?) radio astronomy.
  • ECS Sensor Network Research
    • 868Mhz omni for sensor network node
  • There is still room for other interest should there be any

Antenna/Feature Ideas

Confirmed

  • HF beam dipole
  • triband 2m/70cm/6m omni
  • 70cm+2m on dual-axis rotator
  • SURGE FM broadcast antenna
  • SOWN Wi-Fi @ coordinates
  • 868 sensor net antenna on spur

Sensible

  • 23cm on spur
  • radio telescope (astrosoc)
  • monitoring node (temp/wind ect)

Current Plan

From top of the mast to bottom.

  • 6m/2m/70cm collinear (AR+satellites+HABs)
  • Spur bar
    • FM Broadcast antenna (SURGE)
    • 868 MHz omni (sensor networks)
  • HF Dipole (AR)
  • Azimuth Rotator

Kit

  • Statuses
    • Arrived - We have the item.
    • Ordered - We have ordered the item.
    • Approved - We are good to purchase the item but have not done so yet.
    • Awaiting Approval - We know what we need and are awaiting financial approval.
    • Pending - Something is blocking on us being able to approve this item.

All prices are VAT included, unless otherwise specified. "+ £X.XX" indicates additional costs, such as shipping.

Purchase Tracking

Item Cost Link Budget Status Ordered / Acquired By Notes Actions Required
Triband Vertical £87.95 [1] Mast Arrived 2015-04-21 TylerWard
Lithium Grease 500g £7.95 [2] Mast Arrived 2015-05-11 TylerWard. Datasheet
SSD for APU board £32.39 [3] ECS Networks Arrived 2015-05-11 ECS
868 Antenna £23.44 [4] Mountain Sensing Arrived 2015-05-14 Kirk
2M Crossed Yagi £89.95 + £4.99 [5] Mast Arrived 2015-05-15 TylerWard
Separation kit G5400 Free (Thanks Yaesu) N/A N/A Arrived 2015-05-15 Nsefan Purpose: To mount the elevation on a pole
Horizontal mast section Already owned by SUWS N/A N/A Arrived DavidNewman Needs 32-43mm diameter needs cleaning
Fast Ethernet 16 port managed switch (with gigabit uplink) Free (Thanks ECS) N/A N/A Arrived 2015-05-20 DavidNewman
Dual Axis Rotator £40 [6] Mast Arrived 2014 M0NSA Awaiting invoice for reimbursement
HF Dipole Beam Already owned by SUWS N/A N/A Arrived 19?? Craag Refurbishment required. Replacement parts will be required
Ubiquity Powerbeam PBE-M5-300 and accessories £66.46 [7] TJC's Services Rendered Arrived 2015-05-19 ECS
Screws For Rotator (M6*20) £5.03 [8] Mast Arrived Muzer Awaiting invoice
Nuts For Rotator (M6) £3.78 [9] Mast Arrived TylerWard
Washers For Rotator (M6) £1.19 [10] Mast Arrived TylerWard
70cm Yagi £52.96 + £10 [11] Mast Approved Awaiting Purchase (Waiting on ML&S order)
Loctite 243 (for securing the bolts) £8.27+VAT [12] Mast Approved Needs Ordering (awaiting a onecall order)
Loctite 262 £3.99 [13] Mast Arrived Tyler-Ward
HF Balun £29.95 + £4.00 [14] Mast Approved Awaiting order from walters and stanton
0.5in x 1 metre long aluminium tube (1.6mm thick) £7.38 [15] Mast Approved Replacement for broken EG component of HF beam Date to be approved/ordered: Approve ASAP. (May check if anything else needs to be ordered from same supplier before ordering).
Vertical mast section £52.95 [16] Mast Pending Needs to be between 38-63mm in diameter To be approved later need to confirm appropriate length
Mast Thrust Bearing (Yaesu GS-065) £47.61 + VAT [17] Approved Need to confirm wall mounting
Rotator and Bearing Wall Mounts £59.23 + VAT [18] Pending Yaesu BE645Y, Pair including both rotator and bearing bracket Need to confirm wall mounting
Rack Cupboard £180 [19] Pending 21U 600mm Deep Data Cabinet/Data Rack Pending SUSU approval for wall mounting

Open Orders with suppliers

Supplier Items Delivery Cost Minimum Order Notes Actions Required
onecall.farnell.com FREE £20
http://wsplc.com/ £4 NONE
screwfix
£? NONE Can buy directly in Southampton store

Other parts known to be needed

  • Extra Mounting hardware



  • Internal patch panel parts


  • Parts for HF dipole


  • Coax parts
    • coax
    • connectors
    • Per Antenna Feed (5 required)
      • 2x weatherproof Flex-8 Connectors
    • Per Room Feed (5 required, 8 ideally)
      • 1x Weatherproof RG-213 Connector
      • 1x indoor RG-213 Connector
  • connection plate
    • ?* weatherproof N through connectors [[21]]
    • ?* N blanking plates
    • Mounting frame (suggest stainless or aluminium)
    • Connector box [[22]]
      • 2* ethercon panel connectors [[23]]
      • 2* XRL7 male panel [[24]]
      • 2* XLR7 female panel [[25]]
      • 2* ethercon cable [[26]]
      • 2* XLR7 female cable [[27]]
      • 2* XLR7 male cable [[28]]
      • potting compound [[29]] / lots of silica gell
      • D connector mounting plate [[30]]
      • weatherproofing ans sealant [[31]]

Coax Info

Information sourced from Coax Data and ML&S

Prices sourced from ML&S inc. VAT

Diameter RF Loss Max Power Handling Cost Datasheet
mm dB/100ft @ 400MHz W @ 50MHz (1:1 SWR) /25m Reel
RG-58 5 10.5 450W £20.70
RG-213 10.3 4.5 1500W £32.25 http://www.romkatel.ro/cataloage/pdf/eupen/RG213.pdf
Ultraflex 7 7.3 3.59 1820W £29.70 http://www.messi.it/dati/immagini/RGAC7PLUS-All1_EN.pdf

Note: Connectors for Ultraflex 7 are uncommon, and so may add significantly to the expense.


History

Previous mast installed in this location

OldMast.jpg

photo from: http://2009.igem.org/wiki/images/f/fa/Hartley_web.jpg